Sunday21 Posted October 11, 2019 Report Posted October 11, 2019 Dear Smart People, This is a valve situated inside my house that turns the water on/off to an exterior garden hose. First position: As per the photo. The handle is currently as far clockwise as it will go. Second position: If you turn the valve counter clockwise, the second position occurs when the valve lines up so that it is vertical as is the blue pipe. So what do you think? Is the valve in the photo open or closed? Do you happen to know what this type of valve is called? Once we work this out, I will label the pipe! I think that the kind and industrious couple who used to own this house missed this pipe because every other pipe in the house is carefully labelled! Many thanks! Quote
Barrett Maximus Posted October 11, 2019 Report Posted October 11, 2019 The valve in the photo is in the off position. Vort, Just_A_Guy and Sunday21 2 1 Quote
Fether Posted October 11, 2019 Report Posted October 11, 2019 (edited) * had a stupid joke here... realized how lame it was so I deleted it Edited October 11, 2019 by Fether Quote
Sunday21 Posted October 11, 2019 Author Report Posted October 11, 2019 15 minutes ago, Fether said: * had a stupid joke here... realized how lame it was so I deleted it Too lame for us? Surely not! SilentOne 1 Quote
Just_A_Guy Posted October 11, 2019 Report Posted October 11, 2019 Looks like a type of ball valve. Sunday21 1 Quote
Iggy Posted October 11, 2019 Report Posted October 11, 2019 It is a ball valve and it is closed. Open would be the handle following the flow of whatever it is containing. That blue tubing looks like what was used in Manufactured homes for water. Quote
Sunday21 Posted October 11, 2019 Author Report Posted October 11, 2019 (edited) 4 hours ago, Iggy said: It is a ball valve and it is closed. Open would be the handle following the flow of whatever it is containing. That blue tubing looks like what was used in Manufactured homes for water. Thank you @Iggy! Now that you explain this makes perfect sense! Edited October 11, 2019 by Sunday21 Quote
Iggy Posted October 11, 2019 Report Posted October 11, 2019 3 hours ago, Sunday21 said: Thank you @Iggy! Now that you explain this makes perfect sense! You are welcome @Sunday21. My home is a 1993 double wide manufactured. ALL of the water pipes were of that crappy blue tubing. In March of 2011, 4 months after we moved in, we had the piping changed out in the two bathroom toilets, the master bathroom sink and the kitchen sink. In 2012 we had to have the hall way bathroom sink water lines changed out when the cold water valve sheared off and flooded the bathroom and over half of the carpeted hallway. In 2016 our landowner [he owns the lot we rent and he supplies us with our water] refused to turn on the outdoor water taps. No way was I going to haul water from the bathroom out to the $350.00+ worth of flowers and vegetables I had just purchased and planted, so we hired a company to come out and put in outdoor taps coming off of our main water coming into the house. When the guy got under there he told us that over half of the water pipes were CPVC and the rest the crappy blue tubing. He didn't have to recommend us removing the blue tubing. Now the entire water lines are CPVC. AND they are all insulated with foam noodles rated for zero degree weather, along with removing all of the tubing in the rest of the house to CPVC.. To do all of this it cost us over $1500.00 ~ but it was WELL worth it. At the plumbers suggestion, we have our Easy Access (my label) Shut Off Valve to the outside taps right next to our hot water heater that is housed between the laundry room and kitchen. Quote
Traveler Posted October 11, 2019 Report Posted October 11, 2019 @Sunday21 A couple of notes: You indicated that this is to an outside garden hose. The copper elbow just above the valve has blue and white. This is a characteristic of a poor solder joint. I agree with @Iggy that the blue plastic pipe ought to be replaced. I am concerned that your plumbing is loose and supported only by the piping - also there are stables that will cause corrosion if they ever even touch your copper plumbing. You may want to think about anchoring and protecting your plumbing. Your picture does not indicate the condition of your plumbing to your outside water faucet. That needs to be caulked and sealed. If you winterize your outside faucet make sure you drain the water (relieve the pressure) from you interior valve to your outside faucet. This can be done by opening your valve with your hose detached. You may also think about some insolation to maintain heat in winter and cool in summer inside your house. The Traveler Quote
Grunt Posted October 11, 2019 Report Posted October 11, 2019 Everything looks fine to me. Valve is off. I assume the PEX goes to your supply and the copper goes through the wall. Depending on where you live I'd shut that off in winter. Maybe install an anti-freeze faucet. Solder job is rough and looks like there is some extra flux there. Did you have a specific issue you were concerned with? Quote
Sunday21 Posted October 11, 2019 Author Report Posted October 11, 2019 @Iggy Thank you sooo much for telling me! I will have to plan for this! Quote
Sunday21 Posted October 11, 2019 Author Report Posted October 11, 2019 @Traveler Thank you so much! Fortunately I know a good building inspector that I can hire to discuss. Thanks for the early warning! Quote
Sunday21 Posted October 11, 2019 Author Report Posted October 11, 2019 53 minutes ago, Grunt said: Everything looks fine to me. Valve is off. I assume the PEX goes to your supply and the copper goes through the wall. Depending on where you live I'd shut that off in winter. Maybe install an anti-freeze faucet. Solder job is rough and looks like there is some extra flux there. Did you have a specific issue you were concerned with? @Grunt Thanks for your comment! I did not know if the valve was letting water out or if the valve was turned off! Grunt 1 Quote
Vort Posted October 11, 2019 Report Posted October 11, 2019 (edited) 19 hours ago, Sunday21 said: Dear Smart People, This is a valve situated inside my house that turns the water on/off to an exterior garden hose. First position: As per the photo. The handle is currently as far clockwise as it will go. Second position: If you turn the valve counter clockwise, the second position occurs when the valve lines up so that it is vertical as is the blue pipe. So what do you think? Is the valve in the photo open or closed? Do you happen to know what this type of valve is called? Once we work this out, I will label the pipe! I think that the kind and industrious couple who used to own this house missed this pipe because every other pipe in the house is carefully labelled! Many thanks! Remember it this way: Generally speaking, valve handles "point" in the direction that they allow flow. So a valve handle pointed along a pipe shows that it allows water to flow along the pipe (i.e. the valve is open), while a valve handle pointing across the pipe "allows" water to "flow" across the pipe—in effect, it stops water flow (i.e. the valve is closed). Edited October 11, 2019 by Vort Sunday21 and Traveler 1 1 Quote
Sunday21 Posted October 11, 2019 Author Report Posted October 11, 2019 @Vort Excellent memory trick! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.